Option 1: Embroidery on clothing/fabric:
The embroidery is a process that traces a drawing by wire, on a fabric from a needle machine. This type of customization is used to decorate the following items:
- Garments such as: coats, hoods, sleeves, long sleeves ...
- Bags/bags
- Tuques and caps
- Blankets, aprons and all other fabrics ...
It is not recommended to use this type of decoration on thin fabrics that can be rubbed by washing. It is also possible that we cannot make embroidery on certain items, either because there is no access pouch to insert our support for embroidery, or because the fabric is too thick.
Digitalization:
A digitalization is the creation of an image (logo) in embroidery format (i.e. DST).
All new logos must be digitalized. Fingerprinting is invoiced and must be paid before the process without a refund option. This fee is charged only once for each new logo. A bid may be requested free of charge to determine the cost of the bid.
Approximate prices:
Price for small logo 3.5 ''x3.5' ' with little detail = approximately $55$-60$
Price for big logo 10 ''x10' ' with a lot of detail (example: boat, truck ...) = about $200 Price for big logo 10 ''x10' ' with few details=approximately $150
** The price of digitalisation may vary according to the complexity of the logo, it is preferable to request a submission.
We need to be informed of changes to be made Before The logo or image is digitalized, as additional fees will be charged. A new digitalization may be necessary if too many changes are to be made to an already registered logo.
Steps for embroidery:
-
Send logo In vector format (AI, EPS) or JPEG (We cannot reproduce logos that have copyright) This logo will have to be digitalized if it is not already or if it is not provided in DST format.
-
Provide information Detailed on the logo (size, location, colour ...)
-
Accept submission(A quote for the price of digitalization will be sent to you for each new logo in order to determine the cost and Must be paid before the process Without refund option) The price of embroidery can only be determined after a logo is digitalized, but an approximate price can be provided by the experience of our employees.
-
Accept Sample Embroidery (A sample will be supplied on a piece of cloth before making the embroidery directly on the articles. Changes will be made if necessary and the approved version will be recorded for future orders)
-
Confirm Order (All orders must be confirmed by the customer and no changes can be made after confirmation. Any changes after approval will be applied as a new order)
-
Provide a repository Order (A deposit is required to place an order, without refund)
Information on the calculation of embroidery prices:
The price of embroidery is determined according to the points charter. This chart is a table showing the price calculated according to the quantity of embroidered items and the number of points contained in the logo.
Amount of embroidered items
|
Price Per Points
|
Minimum Price
|
1-11
|
1.20$
|
7.50$
|
12-23
|
0.70$
|
5.00$
|
24-35
|
0.65$
|
4.50$
|
36-71
|
0.60$
|
4.00$
|
72-143
|
0.55$
|
3.50$
|
144-287
|
0.50$
|
3.50$
|
288-499
|
0.45$
|
3.50$
|
Which means:
If a customer wants 1-11 items to be embroidered, the price used to be multiplied will be the one in the same row as the number of items 1-11, therefore $1.20.
The equation used is: ($1.20) X (number of embroidery points) /1000 = price of embroidery.
The number of points is displayed in the program used for embroidery, when the logo is digitalized and ready to embroider.
EX: If a logo contains 10179 points, and a customer requests 11 articles, here is the equation that will determine the price of embroidery:
(1,20$X10179dots) /1000 = 12, 21$
A logo may not fall below the minimum price (3E Column). If the price of the embroidery is below $7.50 for 1-11 items, the price that will be charged will be $7.50. For 12-23 items, the minimum price is $5.00 ...
** We recommend that a bid be submitted to determine prices before accepting. Prices may vary from one order to another, depending on promotions or quantities. We advise you that prices may change at any time without notice.
Option 2: Thermofilm printingOn clothing/fabric:
A Thermofilm impression is the application of vinyl by thermal transfer on the fabric. This type of printing does not require a minimum quantity to be done. The price is determined by the size of the print and the quantity of items to be printed.
Price Information:
1) Split logo with simple details(Decouted when there is empty space between details, such as lettering)
-pocket size 4 ''X4' ' with a color
Quantity 1-9: $5.95
Quantity 10-49: $4.30
-pocket size 4 ''X4' ' with two colors
Quantity 1-9: $7.50
Quantity 10-49: $5.75
-medium format 5 ''X10' ' with a color
Quantity 1-9: $7.85
Quantity 10-49: $6.35
-medium format 5 ''X10' ' with two colors
Quantity 1-9: $11.50
Quantity 10-49: $10.00
-large 10 ''X10' ' format with a color
Quantity 1-9: $15.75
Quantity 10-49: $13.30
-large 10 ''X10' ' format with two colors
Quantity 1-9: $21.25
Quantity 10-49: $18.75
2) Full-fill logo(It is said to be full when the print contains a printed background and can not be seen below)
-Small 16 ' ' square and less
Quantity 1-24: $4.30
Quantity 25-74: $4.00
Quantity 75-249: $3.75
-Medium 17 ''a 49' ' square
Quantity 1-24: $7.50
Quantity 25-74: $6.75
Quantity 75-249: $6.00
-Large 50 ' ' 100 ' '
Quantity 1-24: $13.50
Quantity 25-74: $11.00
Quantity 75-249: $10.50
Option 3: Printing on clothing:
This method of printing uses pochoirs interposed between ink and support. In short, this process prints ink on the fabric. A minimum quantity of items to be printed is required. This type of printing is generally more resistant and of better quality.
The maximum color that can be used to print is 6. A fee of $20 per colour is charged. A fee of $15 is charged for each color change for the same logo on the same order.
Price Information:
Item Quantity
|
1 color
|
2 colors
|
3 colors
|
4 colors
|
5 colors
|
6 colors
|
12-23
|
4,95$
|
5,84$
|
N/A
|
N/A
|
N/A
|
N/A
|
24-35
|
3,91$
|
4,95$
|
5,84$
|
N/A
|
N/A
|
N/A
|
36-47
|
3,17$
|
4,06$
|
4,95$
|
N/A
|
N/A
|
N/A
|
48-71
|
2,42$
|
3,31$
|
4,20$
|
5,12$
|
N/A
|
N/A
|
72-99
|
2,02$
|
2,87$
|
3,76$
|
4,65$
|
5,55$
|
6,45$
|
100-199
|
1,61$
|
2,06$
|
2,57$
|
3,10$
|
4,00$
|
4,90$
|
200-299
|
1,48$
|
1,91$
|
2,36$
|
2,83$
|
3,73$
|
4,63$
|
300+
|
1,34$
|
1,76$
|
2,21$
|
2,65$
|
3,55$
|
4,45$
|
Screen setup - $20$ per color and $15 per color change of the logo for the same order.
*Note that N/A spaces do not apply.
Other impressions:
-Small names or printed words (on sleeve, collet ...) 4,00$
-Name behind sweaters sports (about 4 ''x10' ') 6,00$
-Number 10 ' ' color sweaters sports 4,00$
-Number 10 ' ' two colours sweaters sports 8,00$
-Number 3 ' ' color sweaters sports 2,25$
-Number 3 ' ' two colours sweaters sports 4,25$
-Banner 8.00$
-Banderers of pageant 3.50$
-Vinyl transfer mask printing 3.50$
-Printed tasses 8.00$
-chloroplast sign (feet)
2x2 = 36.55 $2x4 = $73.10
2x3 = 54.40 $4x4 = $146.20
3x3 = $81.60
-Business cards:
Print a face second face
Boite of $250 44 adds $18.75
Boite of $500 72 adds $37.50
Boite of $1,000 127.50 adds $75
** A mounting cost can be charged for 25-40$ for the creation of the logo or for making the assembly. We need to provide a file.
-Poster (in inches) (on ice-board)
8.5X11 12x18 Quantity 1-24 = 2.85$/unit
Quantity 25 + =2.08$/drive
-Envelop invitation cards
4.5X6.5 inches
-custom calendar
-signs
-Canvas frames
-Posters Graduation
-COVID Stickers
** Send us your requests and we will see if it is possible to produce your order.
Promotional Item Decorations Options
The following are the decorations options for the different categories of items:
|
AQUA MARK (AQ) -Printing of accompanying colours on containers for drinking -Minimum printing two colours CANADA Assembly fee is $65.00 (G) by colour/design USA Editing fee is $60.00 (G) by color/design Repetition for mounting: $30.00 (G) each Use the print price and add the following printing fee: $2.25 (G) for up to 3 side colours And $0.40 (E) for each additional accompaniment color after the 3rd color 100 pieces minimum 50 pieces absolute minimum with charge of $80 for an order of less than 100 pieces If you want to add an Aqua Mark to a second place, a second printing fee for this place (based on the quantity-see the price list on this page) AND a printing fee for Aqua Mark will be applicable. Similar to the traditional printing transfer, Aqua Mark was developed exclusively for use on drinking vessels. The ink is applied to a transfer paper instead of being applied directly to the material. The transfer is then applied directly to the product. This method allows the separation of the accompanying colours (corresponding colour PMS) A transparent recovery is always required. A white coating may be required on dark coloured products or on glass. Production time for complete order is 20-25 working days. For order more time to produce longer. Acrylic and Inoxydable Steel: hand wash with a soft cloth to warm water. Glass, Tritan ®, Ceramics, Porcelain Fine and Ceramic de Grès: Upper drawer of the dishwasher on the Porcelain/Délicat cycle Ink change: any order requiring a change in ink colour is subject to a charge of $35.00 (E) per colour.
AQUA MARK HD (HD AQ)-Process four colours for decoration on containers for drinking Assembly Fee $90.00 (G) Repetition for mounting $45.00 (G) Use the print price and add the following printing fee: $2.25 (G) 100 pieces minimum 50 pieces absolute minimum with charge of $80 for an order of less than 100 pieces If you want to add an Aqua Mark HD on a second place, a second draw fee for this place (based on quantity-see the price list on this page) AND a printing fee for Aqua Mark HD will apply. This method of decoration combines the four color process HD Ready and Aqua Mark. You can print your full-colour logos on containers for drinking that, in the past, could bear only the printing of accompanying colours. Production time for complete order is 20-25 working days. For order more time to produce longer. A transparent recovery is still required. Acrylic and Inoxydable Steel: hand wash with a soft cloth to warm water. Glass, Tritan ®, Ceramics, Porcelain Fine and Ceramic de Grès: Upper drawer of the dishwasher on the Porcelain/Délicat cycle
|
|
Bag Badge (BB)
Elevate your brand's perceived value, with on-trend Bag Badge decoration. This high-notice, upmarket option takes your 4-colour process design and turns it into a gorgeous custom decorated dome patch. This high-gloss badge is then heat-sealed onto your product for a truly stunning presentation. Engineered to reflect the most current retail trends, it allows for custom sized square and rectangular shapes, with your choice of square or rounded corners.
Up to 3 square inches-Set up charge: $80.00 (G) each Over 3 square inches up to 5 square inches-Set up charge: $100.00 (G) each Repeat set up charge: $30.00 (G) each
Minimum quantity: 50 pieces. Max width: 3 W. Max height: 2 H. Lead time: 10 business days after digital preproduction sample approval. Add one week for actual preproduction sample.
Utilize imprinted price and add: Minimum 50 pieces - $1.80 (E) 51 to 500 pieces - $1.43 (E) Over 500 pieces - $1.07 (E)
|
|
DÉGAUFRAGE (DEB)
Breaking is possible on most products in leather, koskin, textura, EVA and similicuir. We prepare a matrix of the logo that we press in the material to create a " Printing " Logo. Detrimming is a discrete process that increases the perceived value of several items. The transfer is very similar to serigraphy except that the ink is first applied on a piece of paper transfer and not directly on the material.The cost of the dies is in addition. The cost of the assembly is not applied to the strictly identical orders when the previous order or invoice number is provided. Note: Matrices are kept at the workshop for two years. After two years, a new matrix must be manufactured with a new cost. The transfer is then pressed into the fabric with heat and pressure.
|
|
DECALQUES (DEC)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
To add value to selected high-end products, a logo is transferred from a computer program to a durable vinyl substrate with adhesive backing. Declals of the quadrichromie give the most beautiful effect and are another excellent decoration option. PMS colors are not available.
|
|
BRODERIE (EMB)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
The logo is sewn in the material using wires on surfaces Compatible with embroidery. This method is an elegant way to reproduce many types of logos. The embroidery is a decoration technique that increases the value of your purchase. All bags identified for this purpose can be embroidered and then shipped. Delivery times vary, but our minimum time is 7 to 10 days depending on the workload. Digitization of the graphics file requires 3 to 5 days, except when the controls are accompanied by a embroidery disc. All embroidery prices are based on Isacord 40 polyester yarn. Files must be provided in jpeg or bitmap.
|
|
HD360-Entire Containers for Drinking, Process Four Colors Montate Charge $90.00 (G) Repetition for mounting: $45.00 (G) Use the print price and add the following printing fee: $2.50 (G) each Cost of production: $150 (G), please add 3 business days If your order is $2,500 or more, the production sample fee will be credited once the entire order has been approved. The power of HD-now available as an entire wrap (inside ¼ ") on containers for drinking! HD360 is a revolutionary process that allows you to print high-definition full color on the containers for drinking (four-color process only). This laser precision technique is a four true color scheme, allowing an exquisite presentation. Not available on products for sale or at the end of inventory. Production time for a complete command: Up to 500 pieces: 7 to 10 working days as soon as the layout and the production sample are approved 501 to 1000 pieces: 10 to 12 working days as soon as the layout and the production sample are approved For orders of more than 1000 pieces please find out about the production temp Clean with warm water only and with soft cloth. HD360 Personalized Decoration for Drinkware Set up load $90.00 (G) Repeat set up load $45.00 (G) Utilize imprinted price and add the following run loads: $3.50 (G) each You can now easily personalize your drinkware item with HD360 full wraparound four colour process decorating. Personalizations will be placed under the logo unless otherwise indicated. Personalized information must be submitted at the time of order entry in an Excel document with one name/title/number per cell. Please advise font size and font style (Click here to see fonts available). Arial will be the default font if none specified. The same font and size must be used for the full order. Imprinted minima must be respected. Personalization is not available for NOW! Service, Fast Forward or 3 Day rush.
|
|
HD CHROMA
Assembly Fees: $90.00 (G) Revised order mounting fee: $45.00 (G) Use the print prices and add the following printing costs: $1.50 (G) Our Chroma HD unites a bright color transfer and selective flame tempering to create an exquisite impression of your brand. This allows the perfect representation of the logos, these are of all beauty, highly detailed, precise and lasting. Available now on a selection of our ceramic cups and our products for drinking TBC, Chroma HD is your decorative solution in one for your drinking articles. Maximum size for decoration: 3po x 3po Minimum: 100 Parts Absolute minimum: 50 rooms with costs less than the minimum $80.00 (Each) Production period: 5 to 7 working days after authorisation of the layout Decoration in one place only Specification sample not available-Random samples only A pre-production digital sample is required and must be approved before entering full production on orders above $2500. For orders below $2500 a pre-production sample can be made at the price of $150.00 (G). Please add 5 days for the pre-production sample. Recommended Hand Washing
|
|
HD READY Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each Use the product price with printing and add $0.45 (E) per unit. Full color full definition decoration at reasonable cost now available. Economic printing costs combined with high-resolution high-resolution images make this method of decoration one of the most popular in the industry. Please allow seven to ten business days after preproduction sample approval if one is required. HUB Pens: please allow three to five business days after artwork approval. *** Production times may vary, contact your account manager for current lead times prior to order placement. Longer lead times may be needed for large quantities.
Longer delays may be required for larger quantities. If you need a HD Ready Decoration in an additional location, additional location charges (based on quantity) AND HD ready printing fees apply.
|
|
LASER ENGRAVING (LAS)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
The engraving allows to give a refined and elegant look to a logo. It is etched directly into the surface using a laser. Clear and uniform lines create an innovative and detailed logo. (Excludes BQ9446 & BQ9535-see the product sheet and click on 'Decorating info tab' for laser engraving on this product)
|
|
Laser Engraving on Containers for Drinking (LAS) CANADA Editing costs $65.00 (G) each USA Editing costs $60.00 (G) each Repetition fee for mounting: $30.00 (G) each. Use the print price and add the following printing fee: Up to 500 pieces: $1.20 (G) 500 pieces or more: $1.00 (G) Debco's laser engraving technique uses state-of-the-art laser technology to direct the laser optical system to a central point. The energy delivered to this central point is transformed as a printing is created, typically by spraying the surface coating. The result is a long-lasting decoration which is essentially engraved on the surface of the object in place where the laser is directed. Please note: available on select colours.
Laser engraving Personalized for articles used in Boire (LAS) Editing costs $65 .00 (G) each Revised order mounting fee: $30.00 (G) each. Use the print prices and add the following printing costs: Up to 500 pieces: $2.20 (G) 500 pieces and more: $2.00 (G) Now you can easily personalize your articles used to drink with laser engraving. The customizations will be placed under the logo unless otherwise indicated. The customized information must be submitted in the form of an Excel document that contains a name/titre/number per cell. Please inform us of the size and style of the police (Click here to see the available fonts). Arial will be the font used if none is specified. The same font and size must be used for the entire command. Imprint minima must be respected. Printing to a location ONLY. Customization is not available with accelerated service.
|
|
FROSTED PRINTING (GV)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
With our frosted decoration process, you get the appearance of a laser engraving at the cost of a screen printing. With a glazed coloured effect, the matte ink is applied directly to the product. The result is an elegant decoration which recalls the subtle appearance of the engraving. Freezing printing is durable and scratch-resistant. Available on most acrylic, glass and products from the Eastman-Tritan collection. Use the price with printing. Editing costs in addition. Print color only.
|
|
Similar Part (LP)
Editing costs of $65.00 (E) each Recovery fee: $30.00 (G) each
This piece of similarity will surely impress all those who see it. The ancient texture of this room adds value to your logo by adding a level of sophistication. Available in 10 colours: red, beige, orange, white, brown, blue, purple, black, light grey and dark grey. Your logo will take a new dimension on this piece in engraved similarity. Minimum Quantity: Minimum printed. Maximum size: 4 " l. X 4 " H.
Use the printed prices and add: Less than 500 pieces $1.20 (E) 500 pieces and more: $1.00 (E) Production Time: Digital pre-production sample: 5 working days after the approval of the illustration Complete order: Please allow 7 working days after approval of the pre-production sample. Add 7 business days for the actual pre-production sample
|
|
MAX PERFECT (MAXPP)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each The perfect MAX printing process allows a computer-generated colour image to be printed on a transfer material and then pressed on a variety of fabrics such as bound leather, koskin, facsimile, cuirette and vinyl. This process is used when multiple-color serigraphy cannot be performed and is ideally suited for logos with degraded and frames. Requires the presence of an increase in printing (assortment of unsecured color), cut available.
Use Price with print and add: 1-6 square inches $0.26 (E) 7-9 square inches $0.39 (E) 10-12 square inches $0.50 (E) 13-16 square inches $0.66 (E) 17-20 square inches $0.79 (E) 21-24 square inches $1.09 (E) If you need a perfect MAX impression in an additional location, additional cost base (base on quantity) AND the perfect MAX printing costs are applied.
Customization With the Parfaite Printing and Parfaite MAX Printing, it is possible to customize your products at low cost. You can now customize each product of your order with the names of the recipients, Customizations are limited to a printing color and must be contained in the maximum printing surface for perfect printing or perfect MAX printing. The personalization list must be submitted at the time of the order entry in Excel format with a name/titre/number per cell. Please specify the print color, font, and character format (Click here for the list of available fonts). Arial is the default font if none is specified. The minimum quantities specified in the catalog apply. Custom orders are not eligible for Fast Forward and 3 day Fast Forward services. A custom pre-production sample must be approved prior to the production of the complete order. CANADA * In addition to the installation fee of $65.00 (G), for the Perfect Print, there is also an additional mounting fee of $65.00 (G) that is applied to your custom control. Draw fee for Perfect Print is applicable, however, there is no per unit fee for personalization. USA *In addition to the installation fee of $60.00 (G), for the Perfect Print, there is also an additional mounting fee of $60.00 (G) that is applied to your custom control. Draw fee for Perfect Print is applicable, however, there is no per unit draw charge for personalization
|
|
Metal plate (MP)
Installation fee: $200.00 (G) each Recovery fee: $30.00 (G) each
Enjoy a luxurious appearance in your next promotional product with the addition of a zinc alloy plate. Your embossed logo is high on the surface to leave your mark out! Available with up to four accompaniment colors, add a drawing or logo to a variety of our bags to give effect " WOW " Which is incomparable. A minimum of 50 pieces Height of the plate is 0.5 in. Contact us for requests of different shapes and sizes.
Use the printed prices and add: Size of a side colour: up to 1.5 "l x 0.5" H. Less than 500 exhibits $3.00 (E) 500 pieces and more: $2.50 (E) Size of a side colour: up to 2.5 "l x 0.5" H. Less than 500 pieces $4.00 (E) 500 pieces and more: $3.50 (E) For each accompanying colour (up to 4 accompanying colours), please add $0.15 (E) each + $65.00 (G) for mounting costs Production Time: Digital pre-production sample: 7 working days after the approval of the illustration Complete order: Please allow 15 working days after approval of the pre-production sample. Add a week for the actual pre-production sample
|
|
TAMPOGRAPHY (PAD)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
We are proud to have added the tampography to our other interior decorating processes. It is a process that presents new possibilities for several products, since this method is particularly effective for printing round, angular, or uneven surface objects and a perfect means to reproduce complex or small-format logos. A silicone pad transfers the ink to the product. This buffer can reach multiple levels at once. The colours are limited due to the difficulty of matching the colours caused by this process. At this point, we offer print printing in colour only. This technique is used to print materials and articles such as plastic, pens, aluminum, white iron, rubber, cardboard boxes, metal, vinyl, leather and tablet headers.
Any order requiring a change of ink is subject to an additional fee of $35.00 (E) by colour.
|
|
PERFECT PRINTING (PP) Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each The perfect printing process allows a computer-generated colour image to be printed on a transfer material and then pressed on a variety of fabrics. This process is more economical than serigraphy in several colors and is ideal for degradations and frames. Requires a full size white increase. Maximum size of 40 square inches, cutout available. Pre-production sample required for approval prior to full production cycle.
Customization Using the Parfaite Printing process, it is possible to customize your products at low cost. You can now customize each product of your order with the names of the recipients, Customizations are limited to a print color and must be contained within the maximum printable print surface. The personalization list must be submitted at the time of the order entry in Excel format with a name/titre/number per cell. Please specify the print color, font, and character format (Click here for the list of available fonts). Arial is the default font if none is specified. The minimum quantities specified in the catalog apply. Custom orders are not eligible for Fast Forward and 3 day Fast Forward services. A custom pre-production sample must be approved prior to the production of the complete order. In addition to the mounting costs of $65.00 (G) for the perfect printing, additional mounting costs of $65.00 (G) apply for customization. Perfect printing costs apply, however, there are no costs per unit for customization.
|
|
PERMA PRESS (PS)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each Similar to the perfect printing technique, the Perma Press printing allows the transfer of a multicolored image generated by computer to a clear transfer material which is then pressed on different products. In contrast to the perfect impression, the images are printed on an offset printer that uses plates instead of printing silks allowing the production of high-quality images with vibrant colours. We are now able to print four-colour images on materials such as non-woven polypropylene and related leather. Graphic mounts must be provided in high resolution files (300 dpi and more) in vector or bitmap format. It is not necessary to have a full shape. Pantone Color Association not available. No additional fees for profiled logos.
2,000 pieces or less: Delivery times: approximately 10-12 working days after validation of the tests (2,000 pieces or less without pre-production sample for approval). If a digital pre-production sample is requested or necessary in the case of a complex logo, please add one week to the delivery times. More than 2,000 pieces: Delivery times: approximately 15-18 working days after validation of the tests (pre-production digital sample for approval included). For a pre-production physical sample for approval, please add one week to delivery times.
MINIMUM 150 PIECES Utilize imprinted price and add:
Square inches
|
150-249 pieces
|
250 or more
|
0-18
|
$0.55 (E)
|
$0.45 (E)
|
19-28
|
$0.80 (E)
|
0.70 (E)
|
29-40
|
$1.15 (E)
|
$1.05 (E)
|
41-50
|
1.35 (E)
|
$1.25 (E)
|
51-64
|
1.55 (E)
|
$1.45 (E)
|
Maximum format of 64 square inches. Perma Press not available on black-rolled bags.
|
|
PVC (PVC) part
Editing costs of $120.00 (E) each Recovery fee: $30.00 (G) each
Add texture to your decoration with a high PVC piece. The appearance of this suave decoration technique puts your mark in value with a touch of class. You can choose whether a large piece or an engraved piece is better suited to your best brand. Regardless, the PVC piece offers a permanent aspect that is impressive and lasting. A minimum of 50 pieces Maximum size: 4 " l. X 4 " H. in colour (s) PMS should be provided.
Use the printed prices and add: Less than 500 exhibits $1.57 (E) 500 pieces and more: $1.43 (E) The above prices include a color patch of your logo and a background color For each accompanying colour (up to 4 accompanying colours), please add $0.15 (E) each + $65.00 (G) for mounting costs Production Time: Digital pre-production sample: 7 working days after the approval of the illustration The complete order: Allow 10 to 15 working days after approval of the pre-production sample. Add a week for the actual pre-production sample
|
|
DIRECT SERIGRAPHY (SP)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
The direct silkscreen process consists of placing the tissue under a silk screen. By applying pressure in the stencil, the logo is printed directly on the tissue. All our products can be printed in serigraphy unless otherwise stated that the product cannot be printed. Serigraphy is the most common method of decoration.
Any order requiring a change of ink is subject to an additional fee of $35.00 (E) by colour.
|
|
TRANSFER (TR)
Assembly Fees - $65.00 (G) each Correct Repeat: $30.00 (G) each
This method allows an unlimited number of color selections that normally require a sub-layer. DEBCO uses this technique to decorate products with foam insulation or difficult to screen surfaces. Please see the product page and click " Show Decoration Information " To find the fees, extra colours and/or places. If your logo exceeds the listed transfer size, add $0.50 (E) fresh by the brand/design plus the applicable color/location.
Any order requiring a change of ink is subject to an additional fee of $35.00 (E) by colour.
|